The hook should be inserted into the fabric as close to the top of the curtains as possible. This will mean that the curtains will hang below your curtain track or pole.
It is a good option now to measure from where the hook is located and then check that the length is suitable for where you would like the curtains to hang to. There is the ability to move the hook and the pole to fit the length you have made of your curtains
Make sure that you do not hang the curtain to hide the pole or track as this will make them not hang correctly.
The curtains will adjust after a few days as the the weight goes through the hooks. This is the curtains setting into place. So it is advisable to put the hooks in slightly lower in the fabric to allow for this.Once you have the correct position of your hook, move along each pleat and measure the same distance to ensure all of the hooks are in the pleats in the same position.Make sure you do not miss any of the pleats on the curtains and have sufficient ring or sockets on the curtains to support them.
Once the curtains are hanging, draw them back fully and then, from the top of the curtain, push the fabric back, in between the pinch pleats. Run your hand down the length of the curtain and press the pleats.
For a superior finish we recommend, tieing three strips of lining or fabric around each curtain. They should hold the fabric in position but they should not be so tight that they leave indentation marks
.Leave for 2 or 3 days then remove the ties and draw the curtains.
Your curtains should look perfect
