Heavy – Curtains2bedding

Pencil Pleat / Pinch Pleat

For a pencil pleat or pinch pleat heading, measure from the top of the track or the small eye on the ring of the pole to just 1.5cm above the floor, or approximately 15-20cm below the window sill - you can use your best judgement for where you'd like your curtain drop to end. This is your finished hem to hem drop.

Both headings can be adjusted when fitting using the multi pocket tape and hooks for Pencil and the pin on hook for Pinch pleat.

80mm Wave Heading

Measure from the underside of the track to 1.5cm above the floor. Or 15-20cm below the window sill. This will be your finished hem to hem drop

Remember only compatible with wave curtain tracks

44mm Eyelet Heading

Measure from the top of the pole to 1.5cm above the floor, or approximately 15cm to 20cm below the window sill depending on where you'd like the curtains to hang to.

This is your finished top of pole to hem drop. Curtains2bedding add Approximately 3cm to the curtain called the upstand above the top of the eyelet. This does not affect the hanging length of your curtains, but creates a finished look - you don't need to account for this additional 3cm in your measurements if ordering from Curtains2bedding.com